💡

Want to make this pattern your own? Sign up to email it to yourself, save the printable PDF, or resize it for any size — every new account gets a free 7-day Maker trial.

Create your free account · no credit card

Rippled Lace Cotton Doily with Scalloped Edge

A delicate circular doily featuring graceful wave patterns and a simple single crochet border, worked entirely in the round with fingering-weight cotton.

📏 Fit this to your gauge
▶  Start making
▶  Start making
♡
⌂ Save
Difficulty
🟡 Intermediate
Time
⏱️ 8-12 hours
Hook
🪡 Steel 6 / 1.6mm
Yardage
🧶 approximately 600 yards
Est. Cost
💰 $14–$21
Finished Size
📏 14 inches diameter
⚠️
Always make a gauge swatch before starting!
Gauge: 28 sc x 28 rows = 4 inches in single crochet (blocked)
Adjust hook size as needed to match gauge.
📋

At a Glance

The Rippled Lace Cotton Doily with Scalloped Edge is a free Intermediate-level wearable pattern using Fingering weight yarn with a Steel 6 / 1.6mm hook . Estimated time: 8-12 hours. Finished size: 14 inches diameter. You'll need approximately approximately 600 yards of yarn.

27 steps across 4 sections  ·  Free under CC BY-NC-SA 4.0 — you can sell finished items

🧶 Pattern Instructions

💡 Tip: Keep the center tight and even to ensure the ripple pattern begins with proper symmetry.
  1. Round 1
    With steel hook and cotton yarn, ch 4, st">sl st in first ch to form a ring. Ch 1 (does not count as st), sc 8 in ring. Place stitch marker in first sc. (8 sts)
  2. Round 2
    2 sc in each st around. (16 sts)
  3. Round 3
    *Sc 1, 2 sc in next st; repeat from * around. (24 sts)
  4. Round 4
    *Sc 2, 2 sc in next st; repeat from * around. (32 sts)
Row counter:
💡 Tip: The ripple effect emerges naturally as you increase stitches in a consistent pattern. The waves will become more pronounced once blocked. If your stitch count doesn't match exactly, adjust the repeat interval slightly to accommodate your gauge.
  1. Round 5
    *Sc 3, 2 sc in next st; repeat from * around. (40 sts)
  2. Round 6
    *Sc 3, 2 sc in next st; repeat from * around. (50 sts)
  3. Round 7
    *Sc 3, 2 sc in next st; repeat from * around. (60 sts)
  4. Round 8
    *Sc 3, 2 sc in next st; repeat from * around. (70 sts)
  5. Round 9
    *Sc 3, 2 sc in next st; repeat from * around. (80 sts)
  6. Round 10
    *Sc 3, 2 sc in next st; repeat from * around. (90 sts)
  7. Round 11
    *Sc 3, 2 sc in next st; repeat from * around. (100 sts)
  8. Round 12
    *Sc 3, 2 sc in next st; repeat from * around. (110 sts)
  9. Round 13
    *Sc 4, 2 sc in next st; repeat from * around. (132 sts)
  10. Round 14
    *Sc 4, 2 sc in next st; repeat from * around. (158 sts)
  11. Round 15
    *Sc 5, 2 sc in next st; repeat from * around. (184 sts)
  12. Round 16
    *Sc 5, 2 sc in next st; repeat from * around. (210 sts)
  13. Round 17
    *Sc 6, 2 sc in next st; repeat from * around. (240 sts)
  14. Round 18
    *Sc 6, 2 sc in next st; repeat from * around. (268 sts)
Row counter:
💡 Tip: These rounds maintain the wave pattern without further increases, allowing the ripples to stabilize before the final edge treatment.
  1. Round 19
    Sc in each st around. (268 sts)
  2. Round 20
    Sc in each st around. (268 sts)
  3. Round 21
    Sc in each st around. (268 sts)
  4. Round 22
    Sc in each st around. (268 sts)
  5. Round 23
    Sc in each st around. (268 sts)
  6. Round 24
    Sc in each st around. (268 sts)
Row counter:
💡 Tip: The simple single crochet edge frames the ripples beautifully and provides stability without adding bulk.
  1. Round 25 (Scalloped Edge)
    *Sc 3, skip 1 st; repeat from * around to create scalloped edge definition. (201 sts)
  2. Round 26
    Sc in each st around. (201 sts)
  3. Round 27
    Sl st in first st. Cut yarn leaving 6-inch tail and pull through final st to fasten off.
Row counter:

✂️ Finishing

Weave in all yarn ends with tapestry needle. Soak the finished doily in cool water with a gentle wool wash for 15 minutes, then rinse thoroughly in cool water until water runs clear. Gently squeeze out excess water without wringing. Place on blocking board, pin out in a circular shape with even spacing between pins around the perimeter, and allow to air dry completely (24-48 hours). The doily will set into its rippled shape during blocking. Once dry, remove pins and lightly steam if desired to enhance wave definition.

🛒 Materials

Fingering weight cotton yarn
600 yards, 100% cotton or cotton-blend, white, cream, or natural
Find on Amazon
Steel crochet hook
US 6 (1.6mm) or size needed to achieve gauge
Find on Amazon
Stitch markers
2-3 removable markers to track rounds
Find on Amazon
Tapestry needle
For weaving in ends
Find on Amazon
Blocking board and pins
For final blocking and shaping
Find on Amazon

📖 Abbreviations

View full dictionary →
sc — single crochet → dc — double crochet → ch — chain → sl st — slip stitch → st(s) — stitch(es) → rnd — round → dec — decrease →

Tap any abbreviation to look it up. Start a free 7-day Maker trial for full stitch details.

📌 Before You Begin

💡

This doily is worked in continuous spiral rounds from the center outward. Use a stitch marker to mark the beginning of each round.

💡

Tension should be tight and even for the best lace definition. Test gauge before beginning.

💡

Blocking is essential for this doily to achieve the proper ripple shape and scalloped edge.

💡

Work with care on the steel hook as it is delicate.

💡

The ripple pattern is created by strategic increases (2 sc in next st) spaced evenly throughout each round. This creates visual waves that become more pronounced during blocking.

🎁 Ways to Use This

✦

Display on a side table or shelf as a vintage-inspired home accent piece

✦

Layer under a plant pot or vase for an elegant botanical display

✦

Frame the doily stretched and mounted in a shadow box as handmade wall art

✦

Gift to a collector of heirloom textiles or needlework enthusiasts

🧺 Care Instructions

Hand wash in cool water with gentle detergent. Rinse thoroughly and reshape while damp. Air dry flat on a blocking board. Store flat in a clean, dry place away from direct sunlight. Cotton doilies may be pressed with a cool iron if needed for storage, but avoid high heat.

🤖 This pattern was generated by AI and may contain errors. Always test your gauge before starting.

What's wrong with this pattern?

✓ Thanks for your feedback — we'll review it shortly.

📸 Made by our community

See how real makers brought this pattern to life

📷 Sign in to share
📷

Be the first to share a photo of your finished make!

Pattern photo

Report this photo

Questions About This Pattern

Absolutely — just match the weight (Lace). You'll need about approximately 600 yards, so make sure your substitute has enough meterage. Fine yarns give delicate detail. Cotton is great for structured pieces; mohair adds a halo effect for a dreamy look.
This intermediate pattern assumes you're comfortable with basic stitches. You'll use sc, dc, ch, sl st and a few more (see the Abbreviations section above). If increases and decreases are new to you, a quick 10-minute tutorial on YouTube before you start will make the pattern much smoother.
Usually it's the joining or finishing — where individual sections meet and need to align. Read through the entire pattern once before you start so there are no surprises. Use stitch markers generously to track your place, especially in rounds. If a section looks wrong, count your stitches before proceeding — catching an error early saves a lot of frogging later.
For this pattern, gauge is "28 sc x 28 rows = 4 inches in single crochet (blocked)". For decorative or non-fitted items it's less critical, but matching gauge ensures you use the right amount of yarn and get the proportions the pattern intends. If your swatch is too small (too many stitches/inch), go up a hook size. Too large — go down.
Hand wash in cool water with gentle detergent. Rinse thoroughly and reshape while damp. Air dry flat on a blocking board. Store flat in a clean, dry place away from direct sunlight. Cotton doilies may be pressed with a cool iron if needed for storage, but avoid high heat. A general rule: when unsure about the yarn, hand wash in cool water with a drop of gentle detergent, squeeze (don't wring), and block flat to dry. This is safe for almost every fiber.
Each section builds on the last, so yes — follow them in order. That said, some finishing sections (like embellishments or optional edging) can be skipped if you prefer a simpler look. Read through all sections before starting so you understand how the pieces fit together and can plan your yarn usage across sections.