💡

Want to make this pattern your own? Sign up to email it to yourself, save the printable PDF, or resize it for any size — every new account gets a free 7-day Maker trial.

Create your free account · no credit card

Ruffled Halloween Wreath with Dangling Spider

A festive circular wreath with alternating black and orange ruffled borders, embroidered spider web center, and adorable hanging spider accent.

Difficulty
🟡 Intermediate
Time
⏱️ 8-10 hours
Hook
🪡 H / 5mm
Yardage
🧶 approximately 315 yards
Finished Size
📏 18 inches diameter
⚠️
Always make a gauge swatch before starting!
Gauge: 16 sc x 16 rows = 4 inches in single crochet
Adjust hook size as needed to match gauge.
📋

At a Glance

The Ruffled Halloween Wreath with Dangling Spider is a free Intermediate-level wearable pattern using Worsted weight yarn with a H / 5mm hook . Estimated time: 8-10 hours. Finished size: 18 inches diameter. You'll need approximately approximately 315 yards of yarn.

25 steps across 7 sections  ·  Free under CC BY-NC-SA 4.0 — you can sell finished items

🛒 Materials

Worsted weight yarn - Black
200 yards
Find on Amazon
Worsted weight yarn - Orange
100 yards
Find on Amazon
Worsted weight yarn - Gray (optional, for spider)
15 yards
Find on Amazon
Crochet hook size H / 5mm
1 hook
Find on Amazon
Tapestry needle
For embroidery and weaving in ends
Find on Amazon
Black ribbon or yarn
18 inches for hanging loop
Find on Amazon
Fiberfill stuffing (optional)
For spider body if desired
Find on Amazon
Black embroidery thread or thin yarn
For spider web embroidery
Find on Amazon

📖 Abbreviations

View full dictionary →

Tap any abbreviation to look it up. Start a free 7-day Maker trial for full stitch details.

📌 Before You Begin

💡

This pattern is worked in continuous spiral rounds. Use a stitch marker to mark the beginning of each round.

💡

The wreath is constructed with a black circular base, then ruffled borders are added in alternating colors.

💡

Spider web design can be embroidered after the wreath base is complete using black embroidery thread or thin yarn.

💡

The small spider is optional and can be a simple crocheted ball or store-bought decoration.

💡

Finished diameter is 18 inches accounting for ruffled edges and realistic stitch expansion at given gauge.

🧶 Pattern Instructions

💡 Tip: Use a stitch marker to track the start of each round. The circle should lie flat without cupping.
  1. Rnd 1
    6 sc in magic ring (6 sts)
  2. Rnd 2
    2 sc in each st around (12 sts)
  3. Rnd 3
    sc 1, 2 sc in next st, rep around (18 sts)
  4. Rnd 4
    sc 2, 2 sc in next st, rep around (24 sts)
  5. Rnd 5
    sc 3, 2 sc in next st, rep around (30 sts)
  6. Rnd 6
    sc 4, 2 sc in next st, rep around (36 sts)
  7. Rnd 7
    sc 5, 2 sc in next st, rep around (42 sts)
  8. Rnd 8
    sc 6, 2 sc in next st, rep around (48 sts)
  9. Rnd 9-15
    sc in each st around (48 sts). Rep 7 times to create flat circle base.
Row counter:
💡 Tip: The ruffled effect comes from working 2 stitches in each stitch of the previous round, creating gathering.
  1. Rnd 16
    Change to black yarn. Ch 1, 2 sc in each st around. Sl st to join (96 sts). This creates the ruffled effect by doubling stitches.
  2. Rnd 17
    Ch 1, sc in each st around (96 sts). Sl st to join.
Row counter:
💡 Tip: The orange layer adds visual contrast and dimension to the wreath edges.
  1. Rnd 18
    Change to orange yarn. Ch 1, 2 sc in each st around (192 sts). Sl st to join.
  2. Rnd 19
    Ch 1, sc in each st around (192 sts). Sl st to join.
Row counter:
💡 Tip: The third layer is worked at full height without additional doubling on Rnd 20 to maintain proportional ruffle sizing.
  1. Rnd 20
    Change to black yarn. Ch 1, sc in each st around (192 sts). Sl st to join. Do not increase.
  2. Rnd 21
    Ch 1, 2 sc in each st around (384 sts). Sl st to join.
  3. Rnd 22
    Ch 1, sc in each st around (384 sts). Sl st to join. Fasten off.
Row counter:
💡 Tip: Alternatively, appliqué a pre-made spider web design cut from orange or yellow felt onto the black center. For embroidery guidance, refer to online embroidery stitch tutorials.
  1. Step 1
    Thread a tapestry needle with black embroidery thread or thin black yarn. Lightly sketch or plan a simple spider web design on the black center circle using a fabric pencil or chalk.
  2. Step 2
    Embroider a radial web pattern starting from the center. Create 6-8 lines radiating outward from center to the edge of the black circle. Use backstitch (insert needle at end of previous stitch, bring up one stitch length ahead, then return to close gap) or split stitch (bring needle up through fabric, insert back through previous thread, come up ahead) for clean lines.
  3. Step 3
    Add concentric circular lines or curves connecting the radial lines to complete the web pattern. Keep stitches small and consistent.
Row counter:
💡 Tip: The hanging loop should be approximately 4-5 inches long when completed.
  1. Step 1
    Cut an 18-inch length of black ribbon or black yarn doubled. This will be your hanging loop.
  2. Step 2
    Fold the ribbon in half to create a loop. Thread both ends through the top of the wreath (through a few stitches) and tie securely on the back side.
  3. Step 3
    Weave in the ends securely so the loop is fixed at the top center of the wreath.
Row counter:
💡 Tip: Keep the spider simple—exaggerated proportions and dangly legs are more fun and Halloween-appropriate than realistic detail.
  1. Step 1
    Using gray or black yarn, create a small spider body: Ch 2, 6 sc in 2nd ch from hook. Sl st to join. Fasten off leaving a long tail.
  2. Step 2
    Using black yarn, create 4 short chains (legs) approximately 2-3 inches each. Tie securely to the spider body. Attach a small black bead or knot at the end of each leg for effect.
  3. Step 3
    Using the long tail, attach the spider to the bottom center of the wreath by crocheting a chain approximately 6-8 inches long from the spider body to the wreath. Secure the chain end with several stitches through the wreath stitches.
Row counter:

✂️ Finishing

Weave in all remaining yarn ends with a tapestry needle on the back of the wreath. Steam lightly if needed to even out the ruffles and flatten the circle. Ensure the hanging loop is secure and can support the weight of the wreath. If adding the dangling spider, verify all attachments are firmly knotted and stitched. Press the embroidered spider web lightly with a warm iron to set any thread work. Allow the wreath to dry completely before hanging.

🧺 Care Instructions

Spot clean with a damp cloth and mild soap if needed. Do not machine wash. Air dry completely. Store flat or hang in a cool, dry place away from direct sunlight to prevent fading. The embroidered design may fade with extended sun exposure, so consider displaying indoors or in a shaded outdoor location.

🤖 This pattern was generated by AI and may contain errors. Always test your gauge before starting.

What's wrong with this pattern?

✓ Thanks for your feedback — we'll review it shortly.

📸 Made by our community

See how real makers brought this pattern to life

📷 Sign in to share
📷

Be the first to share a photo of your finished make!

Pattern photo

Report this photo

Questions About This Pattern

Absolutely — just match the weight (Worsted). You'll need about approximately 350 yards, so make sure your substitute has enough meterage. Acrylic is budget-friendly and machine-washable; wool gives better stitch definition and drape.
This intermediate pattern assumes you're comfortable with basic stitches. You'll use ch, sc, sl st, dc and a few more (see the Abbreviations section above). If increases and decreases are new to you, a quick 10-minute tutorial on YouTube before you start will make the pattern much smoother.
Usually it's the joining or finishing — where individual sections meet and need to align. Read through the entire pattern once before you start so there are no surprises. Use stitch markers generously to track your place, especially in rounds. If a section looks wrong, count your stitches before proceeding — catching an error early saves a lot of frogging later.
For this pattern, gauge is "16 sc x 16 rows = 4 inches in single crochet". For decorative or non-fitted items it's less critical, but matching gauge ensures you use the right amount of yarn and get the proportions the pattern intends. If your swatch is too small (too many stitches/inch), go up a hook size. Too large — go down.
Spot clean with a damp cloth and mild soap if needed. Do not machine wash. Air dry completely. Store flat or hang in a cool, dry place away from direct sunlight to prevent fading. The embroidered design may fade with extended sun exposure, so consider displaying indoors or in a shaded outdoor location. A general rule: when unsure about the yarn, hand wash in cool water with a drop of gentle detergent, squeeze (don't wring), and block flat to dry. This is safe for almost every fiber.
Each section builds on the last, so yes — follow them in order. That said, some finishing sections (like embellishments or optional edging) can be skipped if you prefer a simpler look. Read through all sections before starting so you understand how the pieces fit together and can plan your yarn usage across sections.

Enjoyed this pattern?

Create your own AI-generated crochet patterns in seconds.
5 free patterns every month.

🎨

Describe what you want to make

Our AI writes a complete, mathematically correct pattern

📚

Save patterns to your library

Come back anytime — your work is always there

💝

No credit card required

Free forever · Upgrade only if you love it

Create free account I already have an account
🧶

Wait — don't leave empty handed!

Enter your email and we'll send you 3 free beginner patterns + a gentle starter guide.

No spam — just cozy crochet goodness

We'll never share your email. Unsubscribe anytime.

💝

Perfect! Check your inbox

Your patterns are on their way.