Can I substitute a different yarn for the Henry the Penguin Cartoon Amigurumi?

Yes — just match the Worsted weight. You'll need approximately approximately 120 yards. The specific brand doesn't matter as much as matching the weight and achieving the correct gauge.

What difficulty level is the Henry the Penguin Cartoon Amigurumi?

This is a Beginner level pattern. Perfect for new crocheters — uses basic stitches and straightforward construction.

How long does the Henry the Penguin Cartoon Amigurumi take to make?

This Beginner-level pattern takes approximately 4-6 hours to complete. Beginners may take a little longer; experienced crocheters often finish faster.

Is the Henry the Penguin Cartoon Amigurumi pattern free?

Yes, completely free. View it online, print it, or save it to your My Crochet Studio library — no payment needed. Creating a free account also lets you track your row count and generate custom patterns.

Can I sell Amigurumis I make from this pattern?

Yes! You can sell finished items at craft fairs, Etsy, or anywhere else. The pattern is licensed under Creative Commons BY-NC-SA 4.0 — selling finished handmade items is permitted. You just cannot sell or redistribute the written pattern itself.

Do I need to make a gauge swatch for the Henry the Penguin Cartoon Amigurumi?

The pattern calls for a gauge of 18 sc x 20 rows = 4 inches in single crochet. For this type of project it's less critical but helps ensure you use the right amount of yarn and get the intended proportions. If your swatch has too many stitches per inch, go up a hook size; if too few, go down.

💡

Want to make this pattern your own? Sign up to email it to yourself, save the printable PDF, or resize it for any size — every new account gets a free 7-day Maker trial.

Create your free account · no credit card

Henry the Penguin Cartoon Amigurumi

A charming stuffed penguin character inspired by the classic Oswald cartoon, perfect for fans of vintage animation.

+ Save Pattern

🤍

Difficulty

🟢 Beginner

Time

⏱️ 4-6 hours

Hook

🪡 E / 3.5mm

Yardage

🧶 approximately 120 yards

Finished Size

📏 5 inches tall

⚠️

Always make a gauge swatch before starting!

Gauge: 18 sc x 20 rows = 4 inches in single crochet

Adjust hook size as needed to match gauge.

📋

At a Glance

The Henry the Penguin Cartoon Amigurumi is a free Beginner-level amigurumi pattern using Worsted weight yarn with a E / 3.5mm hook . Estimated time: 4-6 hours. Finished size: 5 inches tall. You'll need approximately approximately 120 yards of yarn.

30 steps across 6 sections · Free under CC BY-NC-SA 4.0 — you can sell finished items

🛒 Materials

Worsted weight yarn - Black

80 yards, 100% acrylic or wool blend

Find on Amazon

Worsted weight yarn - White

30 yards, 100% acrylic or wool blend

Find on Amazon

Worsted weight yarn - Orange

10 yards, 100% acrylic or wool blend

Find on Amazon

Polyester fiberfill

2-3 oz (approximately)

Find on Amazon

Safety eyes

Two 8mm black safety eyes

Find on Amazon

Tapestry needle

For sewing pieces together

Find on Amazon

📖 Abbreviations

View full dictionary →

sc — single crochet → inc — increase (2 sc in same stitch) → dec — single crochet decrease → ch — chain → sl st — slip stitch → rnd — round → sts — stitches →

Tap any abbreviation to look it up. Start a free 7-day Maker trial for full stitch details.

📌 Before You Begin

💡

Work in continuous spiral rounds unless otherwise noted. Use stitch marker to mark beginning of round.

💡

Stuff firmly as you go for a professional finish.

💡

Henry has a characteristic round body, short flippers, and a white belly.

💡

Pattern is worked bottom-up, starting with the body.

🧶 Pattern Instructions

💡 Tip: The body should be perfectly round and densely stuffed for best results.

Rnd 1

6 sc in magic ring (6 sts)
Rnd 2

inc in each st around (12 sts)
Rnd 3

sc 1, inc, repeat around (18 sts)
Rnd 4

sc 2, inc, repeat around (24 sts)
Rnds 5-10

sc in each st around (24 sts) — 6 rounds
Rnd 11

sc 2, dec, repeat around (18 sts)
Rnd 12

sc in each st around (18 sts)
Rnd 13

sc 1, dec, repeat around (12 sts)
Rnd 14

Stuff firmly. dec around (6 sts). Cut yarn leaving 6-inch tail, thread through remaining sts, pull tight and secure.

Row counter:

💡 Tip: For a cleaner finish, you may embroider or appliqué the white belly after the body is complete instead of crocheting it directly onto the body.

Rnd 1

Join white yarn with st">sl st in the front-center stitch of body at rnd 5 (the horizontal midpoint of the body). Ch 1, sc in same st as join and in the next 11 sts working around the front of the body (12 sts). Mark beginning of round with stitch marker.
Rnds 2-4

sc in each st around (12 sts) — 3 rounds
Finishing

Cut yarn and weave in end. This creates a white patch on the front of the body.

Row counter:

💡 Tip: Flippers should be short and stubby to match Henry's cartoon appearance.

Rnd 1

4 sc in magic ring (4 sts)
Rnd 2

inc in each st around (8 sts)
Rnds 3-5

sc in each st around (8 sts) — 3 rounds
Rnd 6

Stuff lightly. dec around (4 sts). Cut yarn, thread through sts, pull tight.

Row counter:

💡 Tip: Head should be slightly smaller than body for proper proportions.

Rnd 1

6 sc in magic ring (6 sts)
Rnd 2

inc in each st around (12 sts)
Rnd 3

sc 1, inc, repeat around (18 sts)
Rnds 4-6

sc in each st around (18 sts) — 3 rounds
Rnd 7

sc 1, dec, repeat around (12 sts)
Rnd 8

Stuff firmly. dec around (6 sts). Cut yarn, thread through sts, pull tight.

Row counter:

💡 Tip: Create a small triangular beak piece by working 3 rows. The successive rows create a compact triangular shape to sew onto the head.

Step 1

With orange yarn, ch 4. sc in 2nd ch from hook and each ch across (3 sts in first row). Ch 1, turn work.
Step 2

sc in each of the 3 sts (3 sts in second row). Ch 1, turn work.
Step 3

sc in each of the 3 sts (3 sts in third row). Cut yarn leaving 4-inch tail for sewing. The 3 rows create a small triangular/trapezoidal piece that forms the beak shape.

Row counter:

💡 Tip: Use ladder stitch for invisible seams when attaching pieces together.

Step 1

Insert safety eyes into the head on rnd 3 (the largest round before decreasing), approximately 6 stitches apart. Note: After the head is attached to the body, rnd 3 will be positioned as the upper portion of the penguin's face. Secure eyes with washers on inside.
Step 2

Sew beak to center front of head, just below eye placement.
Step 3

Sew head firmly to top of body, centering it.
Step 4

Sew flippers to sides of body, positioning them approximately 2 inches below head.
Step 5

Weave in all remaining ends. Fluff and shape gently into final form.

Row counter:

✂️ Finishing

After all pieces are assembled and stuffed, weave in all yarn ends securely. Use a tapestry needle to hide ends inside the body cavity before closing. Gently shape Henry into a rounded penguin form. Optional: embroider a small smile or add details with embroidery thread if desired. Steam block lightly if needed to even out stitches.

🧺 Care Instructions

🤖 This pattern was generated by AI and may contain errors. Always test your gauge before starting.

What's wrong with this pattern?

✓ Thanks for your feedback — we'll review it shortly.

📸 Made by our community

See how real makers brought this pattern to life

📷 Sign in to share

📷

Be the first to share a photo of your finished make!

Pinch to zoom · drag to pan · arrow keys to navigate · ESC to close

Questions About This Pattern

Absolutely — just match the weight (Worsted). You'll need about approximately 120 yards, so make sure your substitute has enough meterage. Acrylic is budget-friendly and machine-washable; wool gives better stitch definition and drape.

Yes! This is one of the friendlier patterns to start with. You only need to know: sc, inc, dec, ch. Work slowly, count your stitches at the end of each row, and don't be afraid to frog (rip back) and redo a section — that's how everyone learns. Budget about 4-6 hours; beginners often take a bit longer, and that's totally fine.

Stuff as you go for body parts that are hard to reach once closed. Use polyester fiberfill and pack it firmly — softly stuffed amigurumi go floppy quickly. For tiny limbs, use the blunt end of your crochet hook or an unsharpened pencil to push stuffing in. When sewing pieces together, use the same yarn and a tapestry needle with long stitches that you can tighten to control position.

For this pattern, gauge is "18 sc x 20 rows = 4 inches in single crochet". For decorative or non-fitted items it's less critical, but matching gauge ensures you use the right amount of yarn and get the proportions the pattern intends. If your swatch is too small (too many stitches/inch), go up a hook size. Too large — go down.

Spot clean with cool water and mild detergent. Air dry completely. Do not machine wash or use hot water as this may damage acrylic yarn and safety eyes. Store in a clean, dry place away from direct sunlight to prevent fading. A general rule: when unsure about the yarn, hand wash in cool water with a drop of gentle detergent, squeeze (don't wring), and block flat to dry. This is safe for almost every fiber.

Each section builds on the last, so yes — follow them in order. That said, some finishing sections (like embellishments or optional edging) can be skipped if you prefer a simpler look. Read through all sections before starting so you understand how the pieces fit together and can plan your yarn usage across sections.

Henry the Penguin Cartoon Amigurumi

🛒 Materials

📖 Abbreviations

📌 Before You Begin

🧶 Pattern Instructions

Body (Black)

Belly (White)

Flippers (Black) - Make 2

Head (Black)

Beak (Orange)

Assembly

✂️ Finishing

🧺 Care Instructions

What's wrong with this pattern?

Print + save for later?

📸 Made by our community

Report this photo

Questions About This Pattern

Enjoyed this pattern?

Wait — don't leave empty handed!