Can I substitute a different yarn for the Amigurumi Winnie From Oswald Cartoon Stuffed Toy?

Yes — just match the Worsted weight. You'll need approximately approximately 320 yards total. The specific brand doesn't matter as much as matching the weight and achieving the correct gauge.

What difficulty level is the Amigurumi Winnie From Oswald Cartoon Stuffed Toy?

This is a Beginner level pattern. Perfect for new crocheters — uses basic stitches and straightforward construction.

Is the Amigurumi Winnie From Oswald Cartoon Stuffed Toy pattern free?

Yes, completely free. View it online, print it, or save it to your My Crochet Studio library — no payment needed. Creating a free account also lets you track your row count and generate custom patterns.

Can I sell Wearables I make from this pattern?

Yes! You can sell finished items at craft fairs, Etsy, or anywhere else. The pattern is licensed under Creative Commons BY-NC-SA 4.0 — selling finished handmade items is permitted. You just cannot sell or redistribute the written pattern itself.

Do I need to make a gauge swatch for the Amigurumi Winnie From Oswald Cartoon Stuffed Toy?

The pattern calls for a gauge of 16 sc x 16 rows = 4 inches in single crochet. For this type of project it's less critical but helps ensure you use the right amount of yarn and get the intended proportions. If your swatch has too many stitches per inch, go up a hook size; if too few, go down.

💡

Want to make this pattern your own? Sign up to email it to yourself, save the printable PDF, or resize it for any size — every new account gets a free 7-day Maker trial.

Create your free account · no credit card

Amigurumi Winnie from Oswald Cartoon Stuffed Toy

A whimsical elongated Winnie from Oswald plush with raised paws, rust-colored body, and floppy ears.

+ Save Pattern

🤍

Difficulty

🟢 Beginner

Time

⏱️ 8-12 hours

Hook

🪡 H / 5mm

Yardage

🧶 approximately 320 yards total

Finished Size

📏 14 inches tall

⚠️

Always make a gauge swatch before starting!

Gauge: 16 sc x 16 rows = 4 inches in single crochet

Adjust hook size as needed to match gauge.

📋

At a Glance

The Amigurumi Winnie from Oswald Cartoon Stuffed Toy is a free Beginner-level wearable pattern using Worsted weight yarn with a H / 5mm hook . Estimated time: 8-12 hours. Finished size: 14 inches tall. You'll need approximately approximately 320 yards total of yarn.

23 steps across 6 sections · Free under CC BY-NC-SA 4.0 — you can sell finished items

🛒 Materials

Worsted weight yarn - Rust/Orange

180 yards

Find on Amazon

Worsted weight yarn - Beige/Tan

80 yards

Find on Amazon

Worsted weight yarn - Brown

30 yards

Find on Amazon

Worsted weight yarn - Black

20 yards

Find on Amazon

Fiberfill polyester stuffing

8-10 ounces

Find on Amazon

Tapestry needle

For sewing pieces together

Find on Amazon

Black embroidery floss

For nose and smile details

Find on Amazon

6mm amigurumi safety eyes

Optional: 2 pieces for eyes

Find on Amazon

📖 Abbreviations

View full dictionary →

sc — single crochet → inc — increase (2 sc in same st) → dec — decrease (single crochet 2 together) → ch — chain → sl st — slip stitch → rnd — round → st(s) — stitch(es) →

Tap any abbreviation to look it up. Start a free 7-day Maker trial for full stitch details.

📌 Before You Begin

💡

Work all body and head pieces in continuous spiral rounds unless otherwise noted. Use stitch marker to mark beginning of round.

💡

Stuff pieces firmly with fiberfill before closing.

💡

Use rust/orange yarn as main color throughout unless specified.

💡

All measurements are approximate and depend on yarn weight and tension.

🧶 Pattern Instructions

💡 Tip: Stuff head before closing to ensure even shape.

Rnd 1

With rust yarn, 6 sc in magic ring (6 sts)
Rnd 2

inc in each st around (12 sts)
Rnd 3

sc 1, inc, repeat around (18 sts)
Rnd 4-9

sc in each st around (18 sts) for 6 rounds
Rnd 10

sc 1, dec, repeat around (12 sts)
Rnd 11

dec around (6 sts). Stuff firmly. Cut yarn leaving 6-inch tail for sewing.

Row counter:

💡 Tip: Keep body tension consistent to maintain cylindrical shape throughout.

Rnd 1

With rust yarn, 6 sc in magic ring (6 sts)
Rnd 2

inc in each st around (12 sts)
Rnd 3-16

sc in each st around (12 sts) for 14 rounds. This creates the characteristic elongated body.
Rnd 17

dec around (6 sts). Stuff firmly. Cut yarn leaving 6-inch tail.

Row counter:

💡 Tip: Make paws smaller than back legs to show raised position.

Rnd 1

With rust yarn, 6 sc in magic ring (6 sts)
Rnd 2-5

sc in each st around (6 sts) for 4 rounds
Rnd 6

dec 3 times around (3 sts). Stuff lightly. Cut yarn leaving 6-inch tail.

Row counter:

💡 Tip: Brown yarn creates visual distinction for legs on rust-colored body.

Rnd 1

With brown yarn, 6 sc in magic ring (6 sts)
Rnd 2-8

sc in each st around (6 sts) for 7 rounds
Rnd 9

dec 3 times around (3 sts). Stuff firmly. Cut yarn leaving 6-inch tail.

Row counter:

💡 Tip: Belly panel should measure approximately 2 inches wide by 3.5 inches tall.

Row 1

With beige yarn, ch 8. Sc in 2nd ch from hook and in each ch across (7 sts)
Row 2-10

ch 1, turn, sc in each st across (7 sts) for 9 rows
Finishing

Cut yarn leaving 8-inch tail for sewing to front of body.

Row counter:

💡 Tip: Leave ears unstuffed to create the characteristic floppy dachshund ear appearance. Flatten the ear piece before sewing to head.

Rnd 1

With brown yarn, 6 sc in magic ring (6 sts)
Rnd 2

inc in each st around (12 sts)
Rnd 3-8

sc in each st around (12 sts) for 6 rounds
Rnd 9

dec around (6 sts). Do not stuff. Flatten ear and cut yarn leaving 6-inch tail for sewing.

Row counter:

✂️ Finishing

Weave in all remaining yarn ends using tapestry needle, burying them inside the stuffed pieces where possible. Check all seams are secure and re-stitch any loose areas. Fluff and shape the toy, paying special attention to the elongated body to ensure it maintains its characteristic dachshund form. Press gently with hands to distribute stuffing evenly. The finished toy should stand upright on its four legs with front paws raised.

🧺 Care Instructions

🤖 This pattern was generated by AI and may contain errors. Always test your gauge before starting.

What's wrong with this pattern?

✓ Thanks for your feedback — we'll review it shortly.

📸 Made by our community

See how real makers brought this pattern to life

📷 Sign in to share

📷

Be the first to share a photo of your finished make!

Pinch to zoom · drag to pan · arrow keys to navigate · ESC to close

Questions About This Pattern

Absolutely — just match the weight (Worsted). You'll need about approximately 320 yards total, so make sure your substitute has enough meterage. Acrylic is budget-friendly and machine-washable; wool gives better stitch definition and drape.

Yes! This is one of the friendlier patterns to start with. You only need to know: sc, inc, dec, ch. Work slowly, count your stitches at the end of each row, and don't be afraid to frog (rip back) and redo a section — that's how everyone learns. Budget about 8-12 hours; beginners often take a bit longer, and that's totally fine.

Usually it's the joining or finishing — where individual sections meet and need to align. Read through the entire pattern once before you start so there are no surprises. Use stitch markers generously to track your place, especially in rounds. If a section looks wrong, count your stitches before proceeding — catching an error early saves a lot of frogging later.

For this pattern, gauge is "16 sc x 16 rows = 4 inches in single crochet". For decorative or non-fitted items it's less critical, but matching gauge ensures you use the right amount of yarn and get the proportions the pattern intends. If your swatch is too small (too many stitches/inch), go up a hook size. Too large — go down.

Hand wash in cool water with mild soap. Squeeze gently and rinse thoroughly. Do not wring or twist. Lay flat to dry completely. This toy is handmade and not suitable for very young children due to small embroidered or glued features; recommend for ages 3 and up. Store in a clean, dry place away from direct sunlight to prevent color fading. A general rule: when unsure about the yarn, hand wash in cool water with a drop of gentle detergent, squeeze (don't wring), and block flat to dry. This is safe for almost every fiber.

Each section builds on the last, so yes — follow them in order. That said, some finishing sections (like embellishments or optional edging) can be skipped if you prefer a simpler look. Read through all sections before starting so you understand how the pieces fit together and can plan your yarn usage across sections.

Amigurumi Winnie from Oswald Cartoon Stuffed Toy

🛒 Materials

📖 Abbreviations

📌 Before You Begin

🧶 Pattern Instructions

Head

Body

Front Paws (Make 2)

Back Legs (Make 2)

Belly Panel

Floppy Ears (Make 2)

✂️ Finishing

🧺 Care Instructions

What's wrong with this pattern?

Print + save for later?

📸 Made by our community

Report this photo

Questions About This Pattern

Enjoyed this pattern?

Wait — don't leave empty handed!